"

贵州端勒金融服务有限公司

    <form id="lr3n9"><form id="lr3n9"></form></form>

      <form id="lr3n9"><span id="lr3n9"><th id="lr3n9"></th></span></form>

      <form id="lr3n9"><form id="lr3n9"><th id="lr3n9"></th></form></form>

      <address id="lr3n9"></address>

        <address id="lr3n9"><nobr id="lr3n9"></nobr></address>

              "

              全国咨询服务热线:400-6700-720 / 020-38937005

              热门关键词: GELOY PC/ASA HRA222 Victrex PEEK 450CA30 cycoloy pc/abs-XCY620-BK1005

              当前位置:主页 > 产品中心 > Cycoloy PC/ABS > CYCOLOY > PC/ABS >

              Cycoloy PC/ABS C6600-111

              2015-12-21 15:44

              Cycoloy PC/ABS C6600物性

              无溴无氯阻燃的PC + ABS合金,标准流动,耐水解.

              Property
               
              TYPICAL PROPERTIES (1)
              MECHANICAL
              Value Unit Standard
              Tensile Stress, yld, Type I, 50 mm/min
              640
              kgf/cm²
              ASTM D 638
              Tensile Stress, brk, Type I, 50 mm/min
              490
              kgf/cm²
              ASTM D 638
              Tensile Strain, yld, Type I, 50 mm/min
              4
              %
              ASTM D 638
              Tensile Strain, brk, Type I, 50 mm/min
              80
              %
              ASTM D 638
              Tensile Modulus, 50 mm/min
              30500
              kgf/cm²
              ASTM D 638
              Flexural Stress, yld, 1.3 mm/min, 50 mm span
              950
              kgf/cm²
              ASTM D 790
              Flexural Modulus, 1.3 mm/min, 50 mm span
              26700
              kgf/cm²
              ASTM D 790
              IMPACT
              Value Unit Standard
              Izod Impact, notched, 23°C
              56
              cm-kgf/cm
              ASTM D 256
              Instrumented Impact Total Energy, 23°C
              520
              cm-kgf
              ASTM D 3763
              Instrumented Impact Total Energy, -30°C
              520
              cm-kgf
              ASTM D 3763
              THERMAL
              Value Unit Standard
              Vicat Softening Temp, Rate B/50
              99
              °C
              ASTM D 1525
              HDT, 1.82 MPa, 3.2mm, unannealed
              83
              °C
              ASTM D 648
              HDT, 0.45 MPa, 6.4 mm, unannealed
              98
              °C
              ASTM D 648
              HDT, 1.82 MPa, 6.4 mm, unannealed
              90
              °C
              ASTM D 648
              Relative Temp Index, Elec
              80
              °C
              UL 746B
              Relative Temp Index, Mech w/impact
              70
              °C
              UL 746B
              Relative Temp Index, Mech w/o impact
              80
              °C
              UL 746B
              PHYSICAL
              Value Unit Standard
              Specific Gravity
              1.19
              -
              ASTM D 792
              Water Absorption, 24 hours
              0.11
              %
              ASTM D 570
              Mold Shrinkage, flow, 3.2 mm
              0.4 - 0.6
              %
              SABIC Method
              Melt Flow Rate, 260°C/2.16 kgf
              21.5
              g/10 min
              ASTM D 1238
              ELECTRICAL
              Value Unit Standard
              Volume Resistivity
              >1.E+15
              Ohm-cm
              IEC 60093
              Surface Resistivity, ROA
              >1.E+15
              Ohm
              IEC 60093
              Dielectric Strength, in oil, 3.2 mm
              17
              kV/mm
              IEC 60243-1
              Relative Permittivity, 50/60 Hz
              2.7
              -
              IEC 60250
              Relative Permittivity, 1 MHz
              2.7
              -
              IEC 60250
              Dissipation Factor, 50/60 Hz
              0.004
              -
              IEC 60250
              Dissipation Factor, 1 MHz
              0.006
              -
              IEC 60250
              FLAME CHARACTERISTICS
              Value Unit Standard
              UL Recognized, 94V-2 Flame Class Rating (3)
              0.75
              mm
              UL 94
              UL Recognized, 94V-0 Flame Class Rating (3)
              1.5
              mm
              UL 94
              UL Recognized, 94-5VB Rating (3)
              2
              mm
              UL 94
              Processing
               
              Parameter
              Injection Molding
              Value Unit
              Drying Temperature
              80 - 90
              °C
              Drying Time
              3 - 4
              hrs
              Drying Time (Cumulative)
              8
              hrs
              Maximum Moisture Content
              0.04
              %
              Melt Temperature
              245 - 275
              °C
              Nozzle Temperature
              245 - 275
              °C
              Front - Zone 3 Temperature
              245 - 275
              °C
              Middle - Zone 2 Temperature
              220 - 275
              °C
              Rear - Zone 1 Temperature
              220 - 255
              °C
              Mold Temperature
              60 - 80
              °C
              Back Pressure
              0.3 - 0.7
              MPa
              Screw Speed
              40 - 70
              rpm
              Shot to Cylinder Size
              30 - 80
              %
              Vent Depth
              0.038 - 0.076
              mm

              与塑擎合作

              您将会得到更成熟专业的工程塑料供应服务。我们以客户至上,同时也积极挑战,力求呈现最好的服务质量给广大客户。

              工程塑料热线:

              400-6700-720
              020-38937005

              关于塑擎:
              beplay电竞竞猜 小说阅读网免费小说 古风名字 手机推荐排行榜 小说网 好看的玄幻小说 殿上欢 有声 我欲封天 耳根 小说 盗墓笔记小说下载 古风小说 君子以泽
                <form id="lr3n9"><form id="lr3n9"></form></form>

                  <form id="lr3n9"><span id="lr3n9"><th id="lr3n9"></th></span></form>

                  <form id="lr3n9"><form id="lr3n9"><th id="lr3n9"></th></form></form>

                  <address id="lr3n9"></address>

                    <address id="lr3n9"><nobr id="lr3n9"></nobr></address>