"

贵州端勒金融服务有限公司

    <form id="lr3n9"><form id="lr3n9"></form></form>

      <form id="lr3n9"><span id="lr3n9"><th id="lr3n9"></th></span></form>

      <form id="lr3n9"><form id="lr3n9"><th id="lr3n9"></th></form></form>

      <address id="lr3n9"></address>

        <address id="lr3n9"><nobr id="lr3n9"></nobr></address>

              "

              全国咨询服务热线:400-6700-720 / 020-38937005

              热门关键词: cycoloy pc/abs-XCY620-BK1005 GELOY PC/ASA HRA222 Victrex PEEK 450CA30

              当前位置:主页 > 产品中心 > PC > LEXAN > pc-lexan >

              Sabic Lexan PC EXL9330-BK1A068

              2016-11-14 09:20

              Lexan PC EXL9330物性

              -60℃延展性,紫外稳定.耐燃性V-0/5VA. 非卤化,不含溴.

              Property

              TYPICAL PROPERTIES (1)
              MECHANICAL
              Value Unit Standard
              Tensile Stress, yld, Type I, 50 mm/min
              590
              kgf/cm2
              ASTM D 638
              Tensile Stress, brk, Type I, 50 mm/min
              620
              kgf/cm2
              ASTM D 638
              Tensile Strain, yld, Type I, 50 mm/min
              6
              %
              ASTM D 638
              Tensile Strain, brk, Type I, 50 mm/min
              130
              %
              ASTM D 638
              Tensile Modulus, 50 mm/min
              21400
              kgf/cm2
              ASTM D 638
              Flexural Stress, yld, 1.3 mm/min, 50 mm span
              900
              kgf/cm2
              ASTM D 790
              Flexural Modulus, 1.3 mm/min, 50 mm span
              21000
              kgf/cm2
              ASTM D 790
              Tensile Stress, yield, 50 mm/min
              55
              MPa
              ISO 527
              Tensile Stress, break, 50 mm/min
              60
              MPa
              ISO 527
              Tensile Strain, yield, 50 mm/min
              6
              %
              ISO 527
              Tensile Strain, break, 50 mm/min
              125
              %
              ISO 527
              Tensile Modulus, 1 mm/min
              2100
              MPa
              ISO 527
              Flexural Stress, yield, 2 mm/min
              85
              MPa
              ISO 178
              Flexural Modulus, 2 mm/min
              2200
              MPa
              ISO 178
              Hardness, H358/30
              90
              MPa
              ISO 2039-1
              IMPACT
              Value Unit Standard
              Izod Impact, notched, 23°C
              81
              cm-kgf/cm
              ASTM D 256
              Izod Impact, notched, -30°C
              69
              cm-kgf/cm
              ASTM D 256
              Izod Impact, notched, -50°C
              59
              cm-kgf/cm
              ASTM D 256
              Izod Impact, notched, 23°C, 6.4mm
              65
              cm-kgf/cm
              ASTM D 256
              Izod Impact, double-gated, 23°C
              108
              cm-kgf/cm
              SABIC Method
              Instrumented Impact Total Energy, 23°C
              539
              cm-kgf
              ASTM D 3763
              Izod Impact, unnotched 80*10*3 +23°C
              NB
              kJ/m2
              ISO 180/1U
              Izod Impact, unnotched 80*10*3 -30°C
              NB
              kJ/m2
              ISO 180/1U
              Izod Impact, notched 80*10*3 +23°C
              70
              kJ/m2
              ISO 180/1A
              Izod Impact, notched 80*10*3 -30°C
              55
              kJ/m2
              ISO 180/1A
              Izod Impact, notched 63.5*12.7*3.2, 23°C
              80
              kJ/m2
              ISO 180/4A
              Izod Impact, notched 63.5*12.7*3.2, -30°C
              65
              kJ/m2
              ISO 180/4A
              Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm
              75
              kJ/m2
              ISO 179/1eA
              Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm
              60
              kJ/m2
              ISO 179/1eA
              Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm
              NB
              kJ/m2
              ISO 179/1eU
              Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm
              NB
              kJ/m2
              ISO 179/1eU
              THERMAL
              Value Unit Standard
              Vicat Softening Temp, Rate B/50
              142
              °C
              ASTM D 1525
              HDT, 0.45 MPa, 3.2 mm, unannealed
              134
              °C
              ASTM D 648
              HDT, 1.82 MPa, 3.2mm, unannealed
              120
              °C
              ASTM D 648
              HDT, 1.82 MPa, 6.4 mm, unannealed
              124
              °C
              ASTM D 648
              CTE, -40°C to 40°C, flow
              6.66E-05
              1/°C
              ASTM E 831
              CTE, -40°C to 40°C, xflow
              6.66E-05
              1/°C
              ASTM E 831
              CTE, 23°C to 80°C, flow
              7.2E-05
              1/°C
              ISO 11359-2
              CTE, 23°C to 80°C, xflow
              7.7E-05
              1/°C
              ISO 11359-2
              Ball Pressure Test, 125°C +/- 2°C
              PASSES
              -
              IEC 60695-10-2
              Vicat Softening Temp, Rate B/50
              140
              °C
              ISO 306
              Vicat Softening Temp, Rate B/120
              142
              °C
              ISO 306
              HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
              135
              °C
              ISO 75/Be
              HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
              124
              °C
              ISO 75/Ae
              Relative Temp Index, Elec
              125
              °C
              UL 746B
              Relative Temp Index, Mech w/impact
              115
              °C
              UL 746B
              Relative Temp Index, Mech w/o impact
              120
              °C
              UL 746B
              PHYSICAL
              Value Unit Standard
              Specific Gravity
              1.18
              -
              ASTM D 792
              Mold Shrinkage, flow, 3.2 mm
              0.4 - 0.8
              %
              SABIC Method
              Mold Shrinkage, xflow, 3.2 mm
              0.4 - 0.8
              %
              SABIC Method
              Melt Flow Rate, 300°C/1.2 kgf
              10
              g/10 min
              ASTM D 1238
              Density
              1.19
              g/cm2
              ISO 1183
              Water Absorption, (23°C/sat)
              0.35
              %
              ISO 62
              Moisture Absorption (23°C / 50% RH)
              0.15
              %
              ISO 62
              Melt Volume Rate, MVR at 300°C/1.2 kg
              9
              cm210 min
              ISO 1133
              ELECTRICAL
              Value Unit Standard
              Dielectric Strength, in oil, 3.2 mm
              17
              kV/mm
              ASTM D 149
              Relative Permittivity, 50/60 Hz
              2.95
              -
              ASTM D 150
              Relative Permittivity, 1 MHz
              2.9
              -
              ASTM D 150
              Dissipation Factor, 50/60 Hz
              0.0024
              -
              ASTM D 150
              Dissipation Factor, 1 MHz
              0.0085
              -
              ASTM D 150
              Hot Wire Ignition {PLC)
              1
              PLC Code
              UL 746A
              High Ampere Arc Ign, surface {PLC}
              0
              PLC Code
              UL 746A
              Comparative Tracking Index (UL) {PLC}
              3
              PLC Code
              UL 746A
              Volume Resistivity
              >1.E+15
              Ohm-cm
              IEC 60093
              Surface Resistivity, ROA
              >1.E+15
              Ohm
              IEC 60093
              Dielectric Strength, in oil, 3.2 mm
              16
              kV/mm
              IEC 60243-1
              Relative Permittivity, 50/60 Hz
              2.6
              -
              IEC 60250
              Relative Permittivity, 1 MHz
              2.7
              -
              IEC 60250
              Dissipation Factor, 50/60 Hz
              0.001
              -
              IEC 60250
              Dissipation Factor, 1 MHz
              0.008
              -
              IEC 60250
              Comparative Tracking Index
              225
              V
              IEC 60112
              FLAME CHARACTERISTICS
              Value Unit Standard
              UL Recognized, 94V-0 Flame Class Rating (3)
              1.49
              mm
              UL 94
              UL Recognized, 94-5VA Rating (3)
              2.99
              mm
              UL 94
              Glow Wire Flammability Index 960°C, passes at
              1
              mm
              IEC 60695-2-12
              Glow Wire Ignitability Temperature, 1.0 mm
              825
              °C
              IEC 60695-2-13
              Oxygen Index (LOI)
              35
              %
              ISO 4589
              UV-light, water exposure/immersion
              F1
              -
              UL 746C

              Processing

              Parameter
              Injection Molding
              Value Unit
              Drying Temperature
              120
              °C
              Drying Time
              3 - 4
              hrs
              Drying Time (Cumulative)
              48
              hrs
              Maximum Moisture Content
              0.02
              %
              Melt Temperature
              295 - 315
              °C
              Nozzle Temperature
              290 - 310
              °C
              Front - Zone 3 Temperature
              295 - 315
              °C
              Middle - Zone 2 Temperature
              280 - 305
              °C
              Rear - Zone 1 Temperature
              215 - 295
              °C
              Mold Temperature
              70 - 95
              °C
              Back Pressure
              0.3 - 0.7
              MPa
              Screw Speed
              40 - 70
              rpm
              Shot to Cylinder Size
              40 - 60
              %
              Vent Depth
              0.025 - 0.076
              mm

              与塑擎合作

              您将会得到更成熟专业的工程塑料供应服务。我们以客户至上,同时也积极挑战,力求呈现最好的服务质量给广大客户。

              工程塑料热线:

              400-6700-720
              020-38937005

              关于塑擎:
              beplay电竞竞猜 小说阅读网免费小说 古风名字 手机推荐排行榜 小说网 好看的玄幻小说 殿上欢 有声 我欲封天 耳根 小说 盗墓笔记小说下载 古风小说 君子以泽
                <form id="lr3n9"><form id="lr3n9"></form></form>

                  <form id="lr3n9"><span id="lr3n9"><th id="lr3n9"></th></span></form>

                  <form id="lr3n9"><form id="lr3n9"><th id="lr3n9"></th></form></form>

                  <address id="lr3n9"></address>

                    <address id="lr3n9"><nobr id="lr3n9"></nobr></address>